AMPLIFIERS
In the heart of every sound system, every installation, every festival and every cinema is the amplifiers. As a sound systems developer we know the importance of reliable, high quality amplification. Our amplifiers are developed and designed with care for every detail. We have several amplifier series for different applications and in different price-ranges.
The flagships in the V-series, 4-channels with FIR-filters, loudspeaker database, high-end 96kHz, 40 bit floating DSP, networking.The P-series, class-D amplifiers with and without DSP
We also sell Powersoft amplifiers as systems amplifiers with Prophon presets, with the many benifits that comes with Powersoft.
V-SERIES
|
|||
|
|||
V-SERIES, 4-CHANNEL SYSTEMS AMPLIFIERS |
|||
| - Designed for tour and installation - 64bit / 96kHz DSP - 4-channel architecture - 4,3” IPS touch-display - Power-sharing technology - up to 10000W in a single 2RU/19" chassie - Class H, 3-step topology - Switch-mode powersupply - PMS technology - Assymetric load capacity - Powerful 1000-taps FIR-filters - Loudspeaker database - All prophon speakers stored - 96kHz/24 bit AD/DA converters - Avaliable with AES67 & DANTE - 2 x ethernet port switch - Daisy-chained ethernet - 2, 4, 8 ohm, 70V, 100V |
- High headroom performance - 10 individual protection systems - Linear phase FIR crossovers - Linear FIR phase EQ filters - Total freedom in routing - 20 snapshots - 20 presets - Master control groups - Smaart® software integration - 12 x IIR filters on each output - 20 x FIR filters on each output - 16 x filters on each input - RMS & Peak limiter per channel - DSP fully accessible from touch-display - Input delay up to 114m. / channel - Output delay up to 31m. / channel - Xover filters FIR & IIR up to 48dB/oct - High voltage output |
Presentation V-series high-power system amplifiers The V-series range of systems amplifiers was designed for reliable fixed installation applications and demanding tour and on-the road usage. Designed, developed and manufactured in the EU, with high quality components, the V-series encompasses a host of high-end functions and features. The powerful on-board 4x4 channel double-64bit/96kHz DSP features 1000 TAPS custom FIR on each channel, with both IIR and FIR filters on all input and output channels. All Prophon speakers are stored in the internal database for easy access, routing and system-setup, where you can design systems and store as presets, or scenes. Furthermore, as a user you have 12 x IIR filters and 20 FIR filters on each output, and 16 filters on each input for customization, room-correction, system EQ or zone adaptation. The large 4,3” IPS touch-panel allows the user to access and set all features and parameters avaliable in the GUI software, with the easyto-use logical menu system. The Class-H 3-step assymterical load, switch-mode topology allows for non-symetrical load and power on channels, for better optimization and power-allocation and for very high headroom. V6000 features a total of 6000W divided on 4 channels (2x3000W bridged) the V10000 features 10000W divided on 4 channels (2x5000W bridged) and V20000 supplies an astounding 20000W with 4x5000W, with powersharing up to 6700W one single channels. The V-series can handle loads from LO-Z: 2ohm-8ohm, and HIGH-Z: 70V & 100V line power Total freedom in routing, virtual grouping allows for grouping EQ´s Built-in Smaart® software integration for measuring and editing acoustics. |
|
| MODEL | V6000 |
V10000 | V20000 |
| Total Power capacity | 6000W | 10000W | 20000W |
| Power All channels driven Lo-Z (powersharing single channel max power) |
8 ohm: 4 x 1100W (1channel 1200W) 4 ohm: 4 x 1500W (1channel 1900W) 2 ohm: 4 x 1450W (1channel 1450W) |
4 x 1600W at 8 ohm (1 channel 1800W) 4 x 2500W at 4 ohm (1 channel 3000W) 4 x 2500W at 2 ohm (1 channel 2500W) |
4 x 2500W at 8 ohms (1 channel 3000W) |
| Power All channels driven Hi-Z |
4 x 800W at 100V 4 x 1500W at 70V |
4 x 2500W at 100V 4 x 2500W at 70V |
4 x 5000W at 100V 4 x 3500W at 70V |
| Bridged mode (BTL) Lo-Z, 8 ohm | 2 x 3000W | 2 x 5000W | 2 x 10000W |
| Parallel bridge (BTL) Lo-Z, 4 ohm | 2 x 2900W | 2 x 5000W | 2 x 10000W |
| Max output voltage and current | 144 Vpeak 38 Apeak |
176 Vpeak 50 Apeak |
235 Vpeak 71 Apeak |
| Frequency responce (+/- 0,8dB) | 20 Hz - 20 kHz | 20 Hz - 20 kHz | 20 Hz - 20kHz |
| S/N 20Hz - 20kHz A-Weighted @ 8 ohm | 106dB | 107,5dB | 115dB |
| THD+N 1/2 Power | 0,1% (typical < 0,05%) | 0,1% (typical < 0,05%) | 0,1% (typical < 0,05%) |
| Mains power | 170V-265V AC / 90V-140V AC | 170V-265V AC / 90V-140V AC | 90-265V AC |
| 1/8 rated operating power @ 4 ohm, 230V | 15A | 16A | 14A |
| Connectors | 4 x XLR analogue female input 2 x XLR female digital AES67 input (option), 2 x DANTE 4 channels (option) 4 x NL4 Speakon output 2 x RJ485 redundant ethernet connectors for networking |
||
| DSP |
Dual 64bit/96kHz platform, 96kHz/24bit AD/DA, 1000-taps FIR, Linear phase FIR crossover, Linear phase FIR EQ filters, total freedom in signal-routing, 20 snapshots, 20 presets, 12 x IIR filters on each output, 20 x IIR filters on each input, 16 x filters on each input, RMS & peak limiter per channel, input delay up to 114m. / channel, output delay up to 31m. / channel, X-over filtersFIR & IIR up to 48dB/oct, |
||
| Loundspeaker database |
All prophon speakers stored in the on-board database for easy access and adress to channels. |
||
| Technology |
Class-H, 3-step topology (V20000 class-D technology) |
||
| Screen |
4,3" Color IPS touch display, fully accessible, all features can be accessed. |
||
| Controls |
Digital rotary encoder |
||
| Weight / dimensions | 8,5 kg. / 483x89x330 mm | 8,5 kg. / 483x89x330 mm | 9 kg. / 483x89x355 mm |
PDSP-SERIES
|
|||
P-SERIES, 4-CHANNEL DSP AMPLIFIERS- 96KHZ, 32 BIT DSP- 6 EQ on each input and 8 EQ on each output - DELAY 0-1000mS - COMPRESSOR, CROSSOVER, EQ, - TOTAL FREEDOM IN SIGNAL ROUTING - 4 x AES / ANALOGUE IN - LCD DISPLAY - DIGITAL ROTARY ENCODER AND PUSH BUTTONS FOR SETTING VALUES - CLASS-D TEHCNOLOGY - WIDE MAINS INPUT 100-240VAC - LIGHT WEIGHT - LATEST GENERATION SWITCHED MODE POWER SUPPLIES |
|||
| MODEL | P426DSP | P418DSP | P4260DSP |
| Power All channels driven Lo-Z |
4 x 350W at 8 ohm 4 x 500W at 4 ohm ¤ x 600W at 2 ohm |
4 x 800W at 8 ohm 4 x 1500W at 4 ohm 4 x 1800W at 2 ohm |
4 x 1300W at 8 ohm 4 x 2400W at 4 ohm 4 x 2600W at 2 ohm |
| Frequency responce (+/- 0,8dB) | 20 Hz - 20 kHz | ||
| S/N (20Hz - 20kHz A-Weighted @ 8 ohm | Typical < -105 dB | ||
| Damping factor | > 800 @ 20Hz - 20kHz / 8 ohm | ||
| THD+N 1/2 Power | 0,3% (typical < 0,1%) 0,1% (typical < 0,05%) | ||
| Mains power | PowerCon 16A / regulated SMPS, 100-240VAC, 50-60Hz | ||
| Connectors | 4 x XLR analogue / 2 x AES female input 4 x Speakon output, 1 x RJ485 ethernet connectors |
||
| DSP |
4 input, 4 output analogue, 2 AES pairs input. |
||
| Screen |
LCD |
||
| Controls |
4 Digital rotary encoders |
||
| Slew rate | 50V / us | ||
| Cross talk | >75 dB | ||
| Dimensions W x D x H | 483*390*45mm | 483*445*45mm | 483*445*45mm |
| Weight | 8 kg. | 10 kg. | 11 kg. |
| Shipping weight | 10 kg. | 12 kg. | 13 kg |
| DOWNLOAD MANUAL PDSP-SERIES | |
||
P-SERIES
|
|||
P-SERIES, TWO- AND FOUR-CHANNEL AMPLIFIERS WITHOUT DSP |
|||
| MODEL | P4700 | P2700 | |
| Power All channels driven Lo-Z |
4 x 350W at 8 ohm Bridged 2 x 900W at 8 ohm |
2 x 350W at 8 ohm |
|
| Frequency responce (+/- 0,8dB) | 20 Hz - 20 kHz | ||
| S/N (20Hz - 20kHz A-Weighted @ 8 ohm | Typical < -105 dB | ||
| Damping factor | > 600 @ 20Hz - 20kHz / 8 ohm | ||
| THD+N 1/2 Power | 0,05% (typical < 0,1%) 0,1% (typical < 0,05%) | ||
| Mains power | PowerCon 16A / regulated SMPS, 100-240VAC, 50-60Hz | ||
| Connectors | 4 x XLR analogue 4 x Speakon output, |
||
| DIP switches | Dip switches in the back for setting, configuration, 4/4, 2/4, 1/4, bridge, parallel, | ||
| Controls |
2 / 4 volume potentiometers |
||
| Slew rate | 50V / us | ||
| Cross talk | >75 dB | ||
| Dimensions W x D x H | 483*390*45mm | 483*435*45mm | |
| Weight | 6 kg. | 5 kg. | 11 kg. |
| Shipping weight | 8 kg. | 7 kg. | 13 kg |
We have chosen Powersoft as a partner, their products are the best on the market with cutting edge technology in combination with unsurpassed reliability.
We have a database with all our speakers to be integrated in the Armonía software, for easy setup and installation, with advanced FIR-filters.
All system-amplifiers features Networking, DANTE, FIR, AES, DSP, PFC (Power Factor Correction) Power sharing etc.
We have selected the X-series for high-end tour applications with up to 4 x 8200W,
The Quattrocanali and Ottocanali series for installation with up to 4 x 2400W and 8 x 1500W, Lo-Z, high-Z, with the integrated control-system operator view for custom control of complex installations using tablets or I-pads as control units, with drag-and-drop menu systems for total control of the most advanced installations, featuring zones, preset recalls, individuel mute and volume in each zone, log-in, possibility for EQ and much more.
and the T-series for portable use with up to 4 x 1500W
X-SERIES |
Quattrocanali-SERIES |
Ottocanali-SERIES |
T-SERIES |
| Tour and high power fixed installations | Fixed installations | Fixed installations | Portable use and tour |
| PX4DSP 4 x 5200W 2 ohm 4 x 3000W 4 ohm 4 x 1600W 8 ohm 2 x 10400W 4 ohm 2 x 6000W 8 ohm |
P4300DSP 4 x 400W 2 ohm 4 x 300W 4 ohm 4 x 300W 8 ohm 2 x 800W 4 ohm 2 x 600W 8 ohm |
P4K4DSP 8 x 450W 2 ohm 8 x 500W 4 ohm 8 x 250W 8 ohm 4 x 900W 4 ohm 4 x 1000W 8 ohm |
P4750DSP 4 x 750W 2 ohm 4 x 750W 4 ohm 4 x 750W 8 ohm 2 x 1500W 4 ohm 2 x 1500W 8 ohm |
| PX8DSP 8 x 5200W 2 ohm 8 x 3000W 4 ohm 8 x 1600W 8 ohm 4 x 10400W 4 ohm 4 x 6000W 8 ohm |
P4800DSP 4 x 800W 2 ohm 4 x 600W 4 ohm 4 x 600W 8 ohm 2 x 1600W 4 ohm 2 x 1200W 8 ohm |
P8K4DSP 8 x 850W 2 ohm 8 x 1000W 4 ohm 8 x 600W 8 ohm 4 x 1700W 4 ohm 4 x 2000W 8 ohm |
P41500DSP 4 x 1500W 2 ohm 4 x 1500W 4 ohm 4 x 1250W 8 ohm 2 x 3000W 4 ohm 2 x 3000W 8 ohm |
| P41200DSP4 x 1500W 2 ohm4 x 1200W 4 ohm4 x 1200W 8 ohm2 x 3000W 4 ohm,2 x 2400W 8 ohm | P12K4DSP8 x 1000W 2 ohm8 x 1500W 4 ohm8 x 850W 8 ohm4 x 200W 4 ohm, 4 x 3000W 8 ohm |
||
| P42400DSP 4 x 1800W 2 ohm 4 x 2400W 4 ohm 4 x 1600W 8 ohm 2 x 3600W 4 ohm 2 x 4800W 8 ohm |
MICRO-SERIES
- 9,5" / 1RU compact DSP-amplifiers for installation,
- with built-in Wifi, ethernet,
- webserver with built-in software accessable via standard browser
- signal-routing
- 8 x programmable GPIO,
- Analogue and digital inputs and outputs
- Loudspeaker database with Prophon speakers for easy setup, system design
- Advanced DSP features with EQ, limiter, delay, zone, grouping, compressor, signal routing,
- Power-Sharing up to 250W / channel
- P4150DSP can be used as 2 x 250W amplifier, 2x200 + 2 x 50W etc.
- FIR filter and IIR filter
- DANTE avaliable optional
- Universal mains 100V-240V
| Model | P2150DSP | P4150DSP |
| Output power@4ohm/8ohm/70V/100V, all channels driven |
125W LoZ / 250W HiZ | 125W LoZ / 250W HiZ |
| Output power@4ohm/8ohm/70V/100V, single channel driven |
250W (power-charing) | 250W (power-charing) |
| Power Consumption | 75W | 150W |
| Dimensions | 44,5 x 220 x 208 mm. | |
| Weight | 2 kg. | 2,8 kg. |
| Output circuitry | UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion | |
| Output voltage | 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded) | |
| Signal to Noice-Ratio | >106dB (A-weighted, 20Hz-20kHz, 8ohm load | |
| THD+N (typical) | < 0,05% (20Hz-20kHz, 8ohm load, 3dB below rated power) | |
| Frequency responce | 20Hz-20kHz (+0/-0,25dB, 8ohm load, 3dB below rated power) | |
| Protection circuits | Short circuit, DC, Undervoltage, Temperature, oversload- protection | |
| Power supply | UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter | |
| Operating temperature | 0-40C | |
| Operating voltage / frequency | Universal mains 100V-240V, 50Hz-60Hz | |