Home > Products > Amplifiers

AMPLIFIERS

In the heart of every sound system, every installation, every festival and every cinema is the amplifiers. As a sound systems developer we know the importance of reliable, high quality amplification. Our amplifiers are developed and designed with care for every detail. We have several amplifier series for different applications and in different price-ranges.

The flagships in the V-series, 4-channels with FIR-filters, loudspeaker database, high-end 96kHz, 40 bit floating DSP, networking.The P-series, class-D amplifiers with and without DSP
We also sell Powersoft amplifiers as systems amplifiers with Prophon presets, with the many benifits that comes with Powersoft.

 

V-SERIES

v1000_202209.jpg

V1000_back_new_202208_500px.jpg

 

V-SERIES, 4-CHANNEL SYSTEMS AMPLIFIERS




pdf_download.jpg
 - Designed for tour and installation
- 64bit / 96kHz DSP
- 4-channel architecture
- 4,3” IPS touch-display
- Power-sharing technology
- up to 10000W in a single 2RU/19" chassie
- Class H, 3-step topology
- Switch-mode powersupply
- PMS technology
- Assymetric load capacity
- Powerful 1000-taps FIR-filters
- Loudspeaker database
- All prophon speakers stored
- 96kHz/24 bit AD/DA converters
- Avaliable with AES67 & DANTE
- 2 x ethernet port switch
- Daisy-chained ethernet
- 2, 4, 8 ohm, 70V, 100V

- High headroom performance
- 10 individual protection systems
- Linear phase FIR crossovers
- Linear FIR phase EQ filters
- Total freedom in routing
- 20 snapshots
- 20 presets
- Master control groups
- Smaart® software integration
- 12 x IIR filters on each output
- 20 x FIR filters on each output
- 16 x filters on each input
- RMS & Peak limiter per channel
- DSP fully accessible from touch-display
- Input delay up to 114m. / channel
- Output delay up to 31m. / channel
- Xover filters FIR & IIR up to 48dB/oct
- High voltage output
The V-series range of systems amplifiers was designed for reliable installation applications and demanding tour and on-the road usage. Designed, developed and manufactured in the EU, with high quality components, the V-series encompasses a host of high-end functions and features. The powerful on-board 4x4 channel double-64bit/96kHz DSP features 1000 TAPS custom FIR on each channel, with both IIR and FIR filters on all input and output channels. All Prophon speakers are stored in the internal database for easy access, routing and system-setup, where you can design systems and store as presets, or scenes. Furthermore, as a user you have 12 x IIR filters and 20 FIR filters on each output, and 16 filters on each input for customization, room-correction, system EQ or zone adaptation. The large 4,3” IPS touch-panel allows the user to access and set all features and parameters avaliable in the GUI software, with the easyto-use logical menu system. The Class-H 3-step assymterical load, switch-mode topology allows for non-symetrical load and power on channels, for better optimization and power-allocation and for very high headroom. V6000 features a total of 6000W divided on 4 channels (2x3000W bridged) and the V10000 features 10000W divided on 4 channels (2x5000W bridged) Handling loads from LO-Z: 2?-8?, and HIGH-Z: 70V & 100V line power Total freedom in routing, virtual grouping allows for grouping EQ´s Built-in Smaart® software integration for measuring and editing acoustics.
MODEL V6000
 
V10000
Total Power 6000W 10000W
Power
All channels driven Lo-Z
8 ohm: 4 x 1100W (single channel 1200W)
4 ohm: 4 x 1500W (single channel 1900W)
2 ohm: 4 x 1450W (single channel 1450W)
4 x 1600W at 8 ohm (single channel 1800W)
4 x 2500W at 4 ohm (single channel 3000W)
4 x 2500W at 2 ohm (single channel 2500W)
Power
All channels driven Hi-Z
4 x 800W at 100V
4 x 1500W at 70V
4 x 2500W at 100V
4 x 2500W at 70V
Bridged mode (BTL) Lo-Z, 8 ohm 2 x 3000W 2 x 5000W
Parallel bridge (BTL) Lo-Z, 4 ohm 2 x 2900W 2 x 5000W
Max output voltage and current 144 Vpeak
38 Apeak
176 Vpeak
50 Apeak
Frequency responce (+/- 0,8dB) 20 Hz - 20 kHz 20 Hz - 20 kHz
S/N (20Hz - 20kHz A-Weighted @ 8 ohm -106dB -107,5dB
THD+N 1/2 Power 0,1% (typical < 0,05%) 0,1% (typical < 0,05%)
Mains power 170V-265V AC / 90V-140V AC 170V-265V AC / 90V-140V AC
1/8 rated operating power @ 4 ohm, 230V 15A 16A
Connectors 4 x XLR analogue female input
2 x XLR female digital AES67 input (option), 2 x DANTE (option)
4 x NL4 Speakon output
2 x RJ485 redundant ethernet connectors for networking
DSP

Dual 64bit/96kHz platform, 96kHz/24bit AD/DA, 1000-taps FIR, Linear phase FIR crossover, Linear phase FIR EQ filters, total freedom in signal-routing, 20 snapshots, 20 presets, 12 x IIR filters on each output, 20 x IIR filters on each input, 16 x filters on each input, RMS & peak limiter per channel, input delay up to 114m. / channel, output delay up to 31m. / channel, X-over filtersFIR & IIR up to 48dB/oct,

Loundspeaker database

All prophon speakers stored in the on-board database for easy access and adress to channels.

Technology

Class-H, 3-step topology

Screen

4,3" Color IPS touch display, fully accessible, all features can be accessed.

Controls

Digital rotary encoder

Dimensions 483 x 89 x 320
Weight 8,5 kg. 10 kg.

 

 

PDSP-SERIES

P4DSP_750px.jpg

P-SERIES, 4-CHANNEL DSP AMPLIFIERS

- 96KHZ, 32 BIT DSP
- 6 EQ on each input and 8 EQ on each output
- DELAY 0-1000mS
- COMPRESSOR, CROSSOVER, EQ,
- TOTAL FREEDOM IN SIGNAL ROUTING
- 4 x AES / ANALOGUE IN
- LCD DISPLAY
- DIGITAL ROTARY ENCODER AND PUSH BUTTONS FOR SETTING VALUES
- CLASS-D TEHCNOLOGY
- WIDE MAINS INPUT 100-240VAC
- LIGHT WEIGHT
- LATEST GENERATION SWITCHED MODE POWER SUPPLIES
 
MODEL P426DSP P418DSP P4260DSP
Power
All channels driven Lo-Z
4 x 350W at 8 ohm
4 x 500W at 4 ohm
¤ x 600W at 2 ohm
4 x 800W at 8 ohm
4 x 1500W at 4 ohm
4 x 1800W at 2 ohm
4 x 1300W at 8 ohm
4 x 2400W at 4 ohm
4 x 2600W at 2 ohm
Frequency responce (+/- 0,8dB) 20 Hz - 20 kHz 
S/N (20Hz - 20kHz A-Weighted @ 8 ohm Typical < -105 dB
Damping factor > 800 @ 20Hz - 20kHz / 8 ohm 
THD+N 1/2 Power 0,3% (typical < 0,1%) 0,1% (typical < 0,05%)
Mains power PowerCon 16A / regulated SMPS, 100-240VAC, 50-60Hz
Connectors 4 x XLR analogue / 2 x AES female input 
4 x Speakon output,
1 x RJ485 ethernet connectors 
DSP

4 input, 4 output analogue, 2 AES pairs input.
96kHz / 32 bit 
6 EQ on each input channels, 8 EQ on each output channel incl High-shelf and low-shelf
Crossover on each output 12-48dB, Linkwitz-Riley, Butterworth, Bessel
Compressor 3, 6, 12 dB

Screen

LCD

Controls 

4 Digital rotary encoders
5 push select buttons

Slew rate 50V / us
Cross talk >75 dB
Dimensions W x D x H 483*390*45mm 483*445*45mm 483*445*45mm
Weight 8 kg. 10 kg. 11 kg.
Shipping weight 10 kg. 12 kg. 13 kg
DOWNLOAD MANUAL PDSP-SERIES pdf_download.jpg    

 

 

P-SERIES

P2700_P4700_x_2_front_700px.jpg 

P-SERIES, TWO- AND FOUR-CHANNEL AMPLIFIERS WITHOUT DSP

 
MODEL P4700 P2700  
Power
All channels driven Lo-Z

4 x 350W at 8 ohm
4 x 500W at 4 ohm
4 x 700W at 2 ohm

Bridged 2 x 900W at 8 ohm
Bridged 2 x 1350W at 4 ohm

2 x 350W at 8 ohm
2 x 500W at 4 ohm
2 x 700W at 2 ohm

 
Frequency responce (+/- 0,8dB) 20 Hz - 20 kHz 
S/N (20Hz - 20kHz A-Weighted @ 8 ohm Typical < -105 dB
Damping factor > 600 @ 20Hz - 20kHz / 8 ohm 
THD+N 1/2 Power 0,05% (typical < 0,1%) 0,1% (typical < 0,05%)
Mains power PowerCon 16A / regulated SMPS, 100-240VAC, 50-60Hz
Connectors 4 x XLR analogue 
4 x Speakon output,

DIP switches Dip switches in the back for setting, configuration, 4/4, 2/4, 1/4, bridge, parallel, 
   
Controls 

2 / 4 volume potentiometers

Slew rate 50V / us
Cross talk >75 dB
Dimensions W x D x H 483*390*45mm 483*435*45mm  
Weight 6 kg. 5 kg. 11 kg.
Shipping weight 8 kg. 7 kg. 13 kg

 

We have chosen Powersoft as a partner, their products are the best on the market with cutting edge technology in combination with unsurpassed reliability.
We have a database with all our speakers to be integrated in the Armonía software, for easy setup and installation, with advanced FIR-filters.
All system-amplifiers features Networking, DANTE, FIR, AES, DSP, PFC (Power Factor Correction) Power sharing etc.
powersoft_features.jpg
We have selected the X-series for high-end tour applications with up to 4 x 8200W,
The Quattrocanali and Ottocanali series for installation with up to 4 x 2400W and 8 x 1500W, Lo-Z, high-Z, with the integrated control-system operator view for custom control of complex  installations using tablets or I-pads as control units, with drag-and-drop menu systems for total control of the most advanced installations, featuring zones, preset recalls, individuel mute and volume in each zone, log-in, possibility for EQ and much more.
and the T-series for portable use with up to 4 x 1500W

X-SERIESx_series.jpg

Quattrocanali-SERIESQ4_series.jpgQ4_series_back.jpg


Ottocanali-SERIESQ8_series.jpg

T-SERIESt_series.jpgt_series_back.jpg


Tour and high power fixed installations Fixed installations Fixed installations Portable use and tour
PX4DSP
4 x 5200W 2 ohm
4 x 3000W 4 ohm
4 x 1600W 8 ohm
2 x 10400W 4 ohm
2 x 6000W 8 ohm
P4300DSP
4 x 400W 2 ohm
4 x 300W 4 ohm
4 x 300W 8 ohm
2 x 800W 4 ohm
2 x 600W 8 ohm
P4K4DSP
8 x 450W 2 ohm
8 x 500W 4 ohm
8 x 250W 8 ohm
4 x 900W 4 ohm
4 x 1000W 8 ohm
P4750DSP
4 x 750W 2 ohm
4 x 750W 4 ohm
4 x 750W 8 ohm
2 x 1500W 4 ohm
2 x 1500W 8 ohm
PX8DSP
8 x 5200W 2 ohm
8 x 3000W 4 ohm
8 x 1600W 8 ohm
4 x 10400W 4 ohm
4 x 6000W 8 ohm
P4800DSP
4 x 800W 2 ohm
4 x 600W 4 ohm
4 x 600W 8 ohm
2 x 1600W 4 ohm
2 x 1200W 8 ohm
P8K4DSP
8 x 850W 2 ohm
8 x 1000W 4 ohm
8 x 600W 8 ohm
4 x 1700W 4 ohm
4 x 2000W 8 ohm
P41500DSP
4 x 1500W 2 ohm
4 x 1500W 4 ohm
4 x 1250W 8 ohm
2 x 3000W 4 ohm
2 x 3000W 8 ohm
  P41200DSP4 x 1500W 2 ohm4 x 1200W 4 ohm4 x 1200W 8 ohm2 x 3000W 4 ohm,2 x 2400W 8 ohm P12K4DSP8 x 1000W 2 ohm8 x 1500W 4 ohm8 x 850W 8 ohm4 x 200W 4 ohm,
4 x 3000W 8 ohm
 
  P42400DSP
4 x 1800W 2 ohm
4 x 2400W 4 ohm
4 x 1600W 8 ohm
2 x 3600W 4 ohm
2 x 4800W 8 ohm
   

 

MICRO-SERIES
P4150DSP.jpg

- 9,5" / 1RU compact DSP-amplifiers for installation, 
- with built-in Wifi, ethernet,
- webserver with built-in software accessable via standard browser
- signal-routing
- 8 x programmable GPIO, 
- Analogue and digital inputs and outputs
- Loudspeaker database with Prophon speakers for easy setup, system design
- Advanced DSP features with EQ, limiter, delay, zone, grouping, compressor, signal routing, 
- Power-Sharing up to 250W / channel
- P4150DSP can be used as 2 x 250W amplifier, 2x200 + 2 x 50W etc.
- FIR filter and IIR filter
- DANTE avaliable optional
- Universal mains 100V-240V

Model P2150DSP P4150DSP
Output power@4ohm/8ohm/70V/100V,
all channels driven
125W LoZ / 250W HiZ 125W LoZ / 250W HiZ
Output power@4ohm/8ohm/70V/100V,
single channel driven
250W (power-charing) 250W (power-charing)
Power Consumption 75W 150W
Dimensions 44,5 x 220 x 208 mm.
Weight 2 kg. 2,8 kg.
Output circuitry  UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output voltage    70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal to Noice-Ratio  >106dB (A-weighted, 20Hz-20kHz, 8ohm load  
THD+N (typical)   < 0,05% (20Hz-20kHz, 8ohm load, 3dB below rated power)
Frequency responce    20Hz-20kHz (+0/-0,25dB, 8ohm load, 3dB below rated power)
Protection circuits  Short circuit, DC, Undervoltage, Temperature, oversload- protection
Power supply  UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature   0-40C  
Operating voltage / frequency    Universal mains 100V-240V, 50Hz-60Hz