Home > Products > Portable sound systems > Self powered systems

SELF-POWERD
PORTABLE SOUND SYSTEMS


Our range of active sound systems are avaliable in several sizes for a variaty of applications, each systems houses state-of-the-art class-D power amplifiers with high resolution DSP processors.

Our active sound systems are perfect for
- DJ´s,
- Bands,
- The rental industry
- The event industry,
- installation

Components from leading European and international suppliers and manufacturers, guarantee high quality with minimum service.

SOME KEY FEATURES ARE
- Low distortion
- High Power
- Light weight
- Compact size
- Easy to setup
- Easy to use
- With great sound!

Each system in the A-series have several pre-programmed PRESETS with different settings for use depending on applications.- Live applications- Recorded music- Cardioid subwoofer setupWith power ranging from 4200W to staggering 7200W the A-series can be used in small to medium and large live stages, clubs and conserts without loosing the quality of the sound.Included in all A-systems is cases, cables, speakers and stands.

The K-systems are our entry-line of cost-efficient active sound systems wihere we have maximized the use of perfectly matched components, creating sound systems with lesser power but with better and more closely matched power-handling in woofers and amplifiers.
A7_komplett.jpg

 

 

 

 

 

 

 

 

 

K1000 - 1000W sound system


PRESENTATION
Designed for smaller bands, DJ´s, events, live stages, and the rental industry, the K1000 system houses all electronics, amplifiers and processing in the back of the subwoofer, also supplying the two passive K10 fullrange speakers.

K1000 ARE PACKED WITH FEATURES
· Adjustable crossover frequencies
· 2 x mic in with separate volume controls
· Balanced (XLR) and unbalanced (RCA) input for both professional
  use and for plugg in an Ipod, Iphone, MP3-player etc.
· Separate volume controls for subwoofer and master,
· Bass and treble controls for adjusting the sound in the top speakers
· The subwoofer has a very high sensitivity, with great punch and
  astounding deep base.
· 600W amplifier to the sub,
· 200W + 200W amplifier for satellites

INCLUDED IN THE SYSTEM
· 1 x KS15A subwoofer with 600W to sub, 2x200W.
· 2 x K10 passive fullrange speakers, powered by KS15A.
· Total of 1000W amplifier. (600W+200W+200W)
· 2 x 10 m. speaker cables included.
· Castor-plate, gig-bags and stands available as options.
· Adjustable crossover frequencies.
- Separate volume controls for perfect system balance.
· 2 x XLR input for balanced stereo sound.
· 2 x RCA input for unbalanced stereo sound (Ipad, MP3)
· 2 x mic in, with separate volume controls
· Limiter, on/off
· Phase reverted subwoofer on/off
· Balance, bass, treble controls for top speakers out.


K1000_2.jpg

K1000_sub_back_350px.jpg K10_back_front.jpg
 The K1000 subwoofer houses all amplification, processing and electronics.
connect the two K10 speakers with the speakon output and you are ready to go!
 
The K10 fullrange speaker are fitted with a powerful 10'' woofer and a driver mounted on a horn

K2000 - 1900W sound system

PRESENTATION
Designed for smaller bands, DJ´s, events, installations, live stages,
and the rental industry, the K2000 system houses all electronics, amplifiers and processing in the back of each speaker.
With an abundance of features the system is versatile and adaptable

INCLUDED IN THE SYSTEM
· 2 x KS18A, 18'' subwoofers with 600W amplifier
· 2 x K12A active fullrange speakers with 350W class-D amplifier
· Total of 1900W amplifier. (600W+600W+350W+350W)
· All cables included (power, signal in, signal link)
· Speaker stand pole for mounting K12A on KS18A
· Castor-plate, gig-bags and extra tripod stands available as options.

KS18A
· 18'' custom woofers with 600W power handling
· 600W amplifier
· Adjustable crossover-frequencies on subwoofers
· Selectable crossover-frequencies for the top speakers output
· 2 x mic in with separate volume controls
· Balanced (XLR) and unbalanced (RCA) input for both professional
  use and for plugging in an Ipod, Iphone, MP3-player etc.
· Separate volume control for subwoofer gain
· The subwoofer has a very high sensitivity, with great punch and 
  astounding deep base.
· Phase invert select 
· XLR line out with selectable cut-off frequency (Fullrange / 80Hz / 125Hz)
· 2 x handles with user-friendly design
· 1,5 mm. perfored powder-coated steel grille with speaker foam behind

K12A
· 12''/1'' active fullrange speaker
· 350W class-D amplifier in each K12A
· 2 x mick in with seperate volume controls
· XLR line in with seperate volume
· Master volume output
· XLR master out (sum of mick and line in)
· Adjustable Low and High frequency responce
· 12 x M10 rigging points for fixed installation or temporary rigging
· 2 x handles
· 35 mm. top hat for mounting on speaker stand 
· 1,5 mm. perfored powder-coated steel grille with speaker foam behind 
K2000_x_2_400px.jpg

 


 

 KS18A_collage_350px.jpg K12A_x_2_350px.jpg
KS18A x 2 pcs

 
K12A x 2 pcs
Class-D amplifier 
       
       
       
       
       
       
       
       
       
       
       
       

A2_komplett_500px.jpg

A2 - 4200W sound system

PRESENTATION
Self-Powered sound system with a total of 4200W class-D amplifiers incorporated in the two single 15'' subwoofers (4 x 1050W into 8 ohms) with passive MF10 multi-purpose fullrange speakers as top speakers mounted on adjustable speaker poles.The built-in amplifiers mounted in the back of the two subwoofers houses power for the B1HPA subwoofer and the passive MF10, incl. sophisticated and deticated DSP processing with Crossover, Delay, EQ, phase.Separate volume controls for each speaker helps tune the system to perfection.Neutrik speakon for connecting the passive MF10 speakers

SPECIFICATIONS
• 2 pcs of B1HPA (Self-powered 15" High-power subwoofer with 
   1000W RMS / 2000W cont. woofers)
• 2 pcs of MF10 (passive 10"/1" multi function fullrange speaker)
• Totally 4200W class-D amplifier
• 5000W total continous power handling
• Built-in DSP processors
• Several Presets for easy system setup
• Includes case, cables and stands
• All amplification are housed in the subs
• Passive multifunction topp speakers
• Topp speakers have monitor angle 

APPLICATIONS
• Bands• DJ´s
• Event and rental industry
• Fixed installation (order without case) 

INCLUDED IN THE SYSTEM
• 2 x B1HPA (1x15'' high power active, self-powered subwoofer    with 2x1050W / 8 ohm class-D power amplifiers each)
• 2 x MF10A (passive, bi-amplified multi function fullrange
  speaker with 350W 10''/1'' components)
• 1 x CMF02 (transport case housing 2 x MF10)
• 2 x POWX10 (10m. cable with both power and signal,
  with Neutrik XLR female to Neutrik XLR male,
  and Schuko to Neutrik blue powercon
• 2 x SC3 (speaker cable with 2 x Neutrik speakon connectors)
 

B1HPA_x_2_500px.jpg mf10.jpg
The B1HPA, self-powered active subwoofer with 2 x 1050W built-in class-D amplifier 
for powering both the subwoofer and the MF10 top speaker
The MF10 passive bi-amplfied multi function fullrange speaker and stage monitor



A3 - 4400W sound system

PRESENTATION
Powerful award winning active sound system for bands, DJ´s rental companies live stages, installations and the event industry, where the multipurpose speakers also are active with 700W class-D amplifiers and 4 presets for different usage:
Fullrange, extended fullrange, monitor, top.
The system is fitted with a total of 4400W class-D amplifiers run into 8 ohms, achieving a superb 
headroom with very low distortion levels. 
The A3 is capable of reproducing astounding SPL for
Its compact size, easily outplaying larger systems.
The small MF10 A can be used for stand alone acoustical and vocal gigs, without the subwoofers.

COMPONENTS

· 2 x B1HPA, 15” high power active subwoofers
· 2 x MF10A, active 10”/1” multi purpose speaker
· Transportation case for the two MF10A
· 2 x combination cable signal/power, powercon/XLR
· 2 x combination cable signal/power, powercon/XLR
· Castors on the B1HPA subwoofers
· 2 x adjustable speaker stand poles

SPECIFICATIONS
· Total of 4400W Class-D amplifiers.
· On-board high resolution DSP´s
· 4 presets on each speaker for a variety of setups
· 1500W / 8 ohm class-D amplifiers in the B1HPA
· 700W / 8 ohm class-D amplifiers in the MF10A


 

 

 

A3_komplett__studio_500px.jpg

 

   

B1HPA_x_2_500px.jpg MF10A_x_2_340px.jpg
B1HPA
With 1500W class-D amplifier in each subwoofer, run in 8 ohms for best sound quality 
4 PRESETS
1) 90Hz
2) 110Hz
3) 90Hz cardioid
4) 120Hz cardioid 
MF10A
700W class-D amplifier,
4 PRESETS for different setups and application
1) Fullrange
2) Extended fullrange
3) Top speaker for recorded music
4) Top speaker for live applications 

 

A4_komplett_500px.jpg

A4 - 5600W sound system

PRESENTATION
Powerful compact active sound system for bands, DJ´s, rental companies live stages, installations and the event industry, The active B1HPA also drives the passive B1HP, supplying them each with 1050W into 8 ohm.
Fitted with a total of 5600W amplifiers run into 8 ohms a superb headroom with very low distortion levels are achieved.
The A4 have more subwoofer power than the A3, for larger performances where massive low-frequency reproduction are essential.
the four 15'' subwoofers can also easily be stacked in cardioid mode, selecting PRESET 3 on the pre-programmed DSP in the back.

The small MF10 A can be used for stand alone on acoustical and vocal gigs, without the subwoofers, or as stage monitors.

COMPONENTS INCLUDED IN THE SYSTEM

· 2 x B1HPA, 15” high power active subwoofers
· 2 x B1HP, 15” high power passive subwoofers
· 2 x MF10A, active 10”/1” multi purpose speaker
· Transportation case for the two MF10A
· 2 x combination cable signal/power, powercon/XLR
· 2 x combination cable signal/power, powercon/XLR
· 2 x speaker cable with neutrik speakon
· Castors on the subwoofers
· 2 x adjustable speaker stand poles
· Total of 5600W Class-D amplifiers.
· On-board high resolution DSP´s
· 4 presets on each speaker for a variety of setups
· 2 x 1050W / 8 ohm class-D amplifiers in the B1HPA
· 700W / 8 ohm class-D amplifiers in the MF10A

DESIGNED FOR
- Medium sized bands
- Traveling DJ´s
- Installation
- The event industry
- Rental companies 
  
B1HPA_x_2_500px.jpg MF10A_x_2_340px.jpg
Using one active and one passive subwoofer on each side is a cost-effective way to have a scalable system where only one of the subwoofer can be used for smaller gigs, where the 4200W amplified subwoofers are not neede, instead using only 2100W and two woofers, saving precious space in both transport and rigging.
4 PRESETS ARE AVALIABLE
1) SUB - SUB (Also driving the passive B1HP subwoofer )
2) SUB - TOP (Also driving a passive fullrange speaker in 8 ohms)
3) SUB - CARDIOID SUB (Place the passive B1HPA behind the active B1HPA at 97 cm. front to front, see separate datasheet for setup)
4) CARDIOID SUB - PASSIVE TOP SPEAKER (this setup allows for the B1HPA with PRESET 4 to be cardioid and run a passive top speaker, another B1HPA must be used as the front speaker using PRESET 2) in this system 2 passive top speakers and 2 B1HPA can be used in CARDIOID mode. 
The 700W class-D amplified multipurpose speaker MF10A can be used as top in an active system, such as the A4, but also as a stagemonitor or stand-alone on a speaker stand, just select PRESET 2 and you will be astounded at the large sound omited from these small cabinets.
A5_komplett_500px_2.jpg

A5 - 4200W sound system

PRESENTATION
Very powerful and easy to use, active sound system for bands, DJ´s, rental companies live stages, installations and the event industry.
With the massive 1200W RMS, 18” woofers B18HPA, and 400W RMS 12”/2” high power passive top speakers CXL122MP, the A5 system delivers high SPL with low distortion levels.

All amplification and processing are housed in the subwoofers,
each B18HPA has 2 x 1050W Class-D power amplifiers with Power Factor Correction. Via the external Neutrik Speakon out, the subwoofer drives the top speaker, with separate volume controls for adjusting the balance of the system.
4 different presets can be selected for different applications and setups.

INCLUDED IN THE SYSTEM
· 2 x B18HPA, 18” high power active subwoofers
· 2 x CXL122MP, passive 12”/2” multi purpose speaker
· Transportation case for the two CXL122MP
· 2 x combination cable signal/power, powercon/XLR
· 2 x speaker cable with neutrik speakon 3m.
· Castors on the subwoofers
· 2 x adjustable speaker stand poles
· Total of 4200W Class-D amplifiers. (4x1050W/8ohm)
· On-board high resolution DSP´s
· 4 presets on each subwoofer for a variety of setups
· All amplifiers and DSP´s in the B18HPA subwoofers

DESIGNED FOR
- Medium bands
- Traveling DJ´s
- Installations
- The event industry
- Rental companies 

 

 







B1HPA_x_2_500px.jpg
 cxl122mp_2st_400px.jpg
The B18HPA
Self-powered active subwoofer with 2 x 1050W with DSP and 4 settings,
for driving both itself and one passive CXL122MP
The CXL122MP
Passive light-weight Neodymium 12''/2'' coaxial fullrange speaker 

A6 - 5600W SELF-POWERED SOUND SYSTEM

PRESENTATION
Compact but yet powerful portable PA system, with 4 x 15'' hiigh-power subwoofers and 2 x 12''/2'' fullrange top speakers.
The subwoofer each houses 2 x 1050W class-D ampliers with Power Factor Correction and on-board DSP processing.
The CXL122MPA multi purpose fullrange speaker houses 700W class-D amplifiers, together they become a powerful PA system for the rental industry, bands, DJ´s and the event industry.

INCLUDED IN THE SYSTEM
· 2 x B1HPA, 15'', 2000W cont. self powered subwoofer
  with 2x1050W class-D amplifiers, also driving the passive B1HP
· 2 x B1HP, 15'', 2000W cont. bi-amplified subwoofer
· 2 x CXL122MPA, 800W cont, 12''/2'' self-powered,
  multi purpose fullrange speaker, with monitor angle.
· 1 x CHCX122MP, transportation case for 2 pcs of the CXL122MPA
· 2 x POWX10, 10m. combination cable with power and signal
· 2 x POWX3, 3 m. compination cable with power and signal
· Castors on the subwoofers
· 2 x Adjustable speaker stand pole with gas-springe.

TECHNICAL SPECIFICATIONS
· Total of 5600W amplifier
  (2x700W in fullrange speakers)
  (4 x 1050W in subwoofers)
· Only 50 cm in width
· Complete with castors, cases, cables and stands
· Neutrik Powercon for power
· Neutrik XLR for signal

A6_komplett_500px.jpg
  
B1HPA_x_2_500px.jpg  
   
A7_komplett.jpg

A7 - 5600W ACTIVE SOUND SYSTEM

PRESENTATION
With 4 x 18'' woofers in combination with two 15''/2'' fullrange top speaker, the A7 sound system is perfect for medium sized bands, and DJ´s, playing for up to 750 people. 
With a large sound and with very low distortion levels, the A7 rig is also very popular for the rental and event industry because of the easy to set up configuration, and because of the many variations the systems offers, having a couple of A7 systems in your rental stock, you can manage a lot of different events at the same time.
As a fixed installation club-rigg the A7 is also perfect, because of the relative compact size in comparison to the high SPL output.

INCLUDED IN THE SYSTEM
· 2 x B18HPA (self-powered active subwoofer with 18'' woofer) 
  with built-in 2 x 1050W amplifiers
· 2 x B18HP (bi-amplified / passive 18'' subwoofer)
· 2 x CXL152MPA (Self-powered active fullrange speaker 15''/2'')
· 2 x POWX10 (Combination cable with power/signal, 10m.)
· 2 x POWX3 (Combination cable with power/signal, 3m.)
· 2 x Speakon cables for connecting active to passive B18HP
· Castors on the B18HP

DESIGNED FOR
· Meduim to large bands
· DJ´s
· Fixed installation in nightclubs and live performance stages
· The rental industry
· The event industry. 

  
B1HPA_x_2_500px.jpg cxl122mp_2st_400px.jpg
B18HPA / B18HP - Active and passive 18'' subwoofers
- 1200W RMS / 2400W cont. power handling
- 4'' voice coil with both outer and inner winding
- Frontloaded tuned bassreflex construction
- 18 mm. super-reinforced baltic birch plywood 
- Double spider technology and reinforced cone 
- vented ferrite magnet for low heat emission in woofer
- Seperate chamber for amplifier with fan controled environment
- only 35kg. in weight
- max SPL 137dB
- Only 60x60x65 in size
- The active version have 2 x 1050W built-in class-D amplifiers, also supplying
  the passive B18HP with 1050W into 8 ohms.
- 4 PRESETS (B18HPA)
  1) SUB - SUB
  2) SUB - TOP
  3) SUB - CARDIOID SUB
  4) CARDIOID SUB - TOP
- Castors included
- Fully covering 1,5 mm. perfored steel grille with 15 mm. thick protective speaker foam
  both with minimum air flow resistance
- Newly designed handles
CXL152MPA - Active Multi Purpose fullrange speaker 
- 500W RMS / 1000W cont. power handling
- 100dB sensitivity
- Max SPL 130dB (1W/1m. @800W)
- 80 degree conical dispersion
- 15'' lightweight neodymium woofer
- 2'' driver mounted coaxially
- Only 21 kg. in weight
- Neutrik Powercon in / out
- Neutrik XLR in / through
- 4 PRESETS
  1) Fullrange
  2) Extended Fullrange
  3) Mid/High top for live application with HP-filter at 95Hz
  4) Mid/High top for recorded music, club music, with HP-filter at 95Hz
- Flightrails for fixed installation and temporary rigging
- 2 handles
- 35 mm. speaker top hat hidden within one of the handles
- Stage monitor angle
- 1,5 mm. fully covering perfored steel grille with 15 mm. foam
  both with minimum air-flow resistance

 
A8_komplett_500px.jpg

A8 - 6450W ACTIVE SOUND SYSTEM

PRESENTATION
Designed for fixed installation in nightclubs and live stages, for bands, DJ´s, and the rental industry, The A8 delivers massive SPL in a relative compact format.
Easy to setup and use, with several preset to chose from depending on setup and application.
The 222A fullrange speakers can easily be used in fullrange mode for smaller applications without the B6HPA subwoofers.
With 2 x 12'' and a 2''-driver mounted on a horn, the 222A delivers speach and instruments with very high precision and with a very high resolution, for club music the 222A will also astound you with the clear and undistorted frequency responce.
The 2x18'' woofer B6HPA has a total power handling of 4800W continous program (2400W RMS) and are packed with 2100W into 8 ohm class-D power amplifier with Power Factor Correction.
Together the B6HPA and the 222A completes a perfect solution for medium to large applications in live performance and recorded music.

INCLUDED IN THE SYSTEM
· 2 x 222A (2x12''/2'' fullrange speaker, with 1125W amplifier)
· 2 x B6HPA (2x18'' subwoofer, 2400W RMS / 4200W cont.)
· WP1 (Transportation castorplate kit for the 222A)
· 2 x POWX10 (Combination cable with power/signal, 10m.)
· 2 x POWX3 (Combination cable with power/signal, 3m.)
· Castors on the B6HPA

DESIGNED FOR
· Meduim to large bands
· DJ´s
· Fixed installation in nightclubs and live performance stages
· The rental industry
· The event industry. 
 
 B6HP_350_500px.jpg 222_300px_x_500px.jpg
 The B6HPA, Active high-power subwoofer
- 2 x 18'' woofers
- Double spider technology
- 4'' voice coil, wired on both inside and outside
- Reinforced cone for extended low frequency emission over long time
- Vented ferrite magnet for minimizing and diverting heat.
- Seperate chamber for each 18'' woofer for minimum interferance.
- Total of 4800W cont. power handling / 2400W RMS
- Built-in Class-D power amplifiers with power factor correction
- 2 x 1050W amplifiers, with a total of 2100W amplification
- Tuned bassreflex construction for optimum frequency responce
- Heavily reinforced 18 mm. high-quality baltic birch plywood
- Double baffle and double back for (36 mm.) for best sonic performance
- High max SPL of 140dB
- 103 dB Sensitivity (half space)
- FOUR PRESETS with different setups in the DSP
  1) 90Hz crossover frequency
  2) 110Hz crossover frequency
  3) Cardioid setup 1 (to be run with another B6HPA using PRESET 1)
  4) Cardioid setup 2 (to be run with another B6HPA using PRESET 2)
- Neutrik Powercon input / output for power
- Neutrik XLR inlut / through for signal
- Amplifiers housed in seperately vented chamber for best performance

The 222A, Active fullrange speaker
- 2 x 12'' Neodymium light weight woofers
- 2'' driver mounted on 90x60 horn
- Tuned bassreflex construction 
- 1125W class-D power amplifier with power factor correction
- 850W RMS / 1700W cont. power handling
- 100dB sensitivity
- Fullrange frequency responce
- Low distortion levels
- High headroom
- FOUR PRESETS with different setups
  1) Fullrange
  2) Extended fullrange
  3) Top speaker with HP-filter, for live applications
  4) Top speaker with HP-filter, for recorded music (DJ´s, clubs etc.)
- Fully covering, perfored 1,5mm. steel grille with 1,5mm. speaker
  foam in front, both with minimum air-flow resistance
- Neutrik Powercon in/out
- Neutrik XLR in/out
- Internally and seperately vented amplifier components for
  optimum performance even on full volume