Portable monitors
|
 |
| PRESENTATION Our range of monitors and multi-purpose speakers are developed to be used in a variaty of ways, thus maximizing your return of investment. We have four different models, Four models are avaliable in passive versions, three models are also avaliable in active versions with built-in class-D amplifiers with on-board DSP: 1) Passive bi-amped speakers, with a built-in advanced deticated passive crossover network, using 1 channel on an external amplifier. 2) Self-powered speaker with built in amplification and DSP processing, where there are 4 presets with different setups for using the speaker in a variaty of applications, from stand-alone to monitor, top in an active sound system with any of our self-powered subwoofers, front-fill, side-fill, delay, etc. the possibilities are endless and only your imagination sets the limits. Our CX and MF speakers are very popular both amonst musicians and technicians, as well as with rental companies and the event industry, due to the high quality, minimum service, reliability and user-friendly design. The series use Neodymium magnet assemby for a high power / low weight ratio. |
|
Stage monitors and
|
|
| FEATURES • Four models from 8" to 15" • Three models avaliable in two versions • Handles, top hats, monitor angle • Protecitve grille with speaker foam • Painted with a 2-component lacque • Protective rails for use as monitor • An abundance of flightware and rigging hardware are avaliable to aid and help the user get the most out of the speaker |
Applications • stagemonitor • Stand-alone • Topp in sound a system with subwoofers • Delay in larger systems • sidefill with or without subwoofers • Frontfill • Fixed installations |
| Model | MF8 | MF10 (A) | CXL122MP (A) | CXL152MP (A) |
| Picture |  |
 |
 |
 |
| Design |
2-way passive, coaxial
|
2-way passive,
lightweight, with neodymium woofer. (A) = active version with 700W amplifier |
2-way passive,
coaxial lightweight neodymium components (A) = active version with 700W amplifier |
2-way passive,
coaxial lightweight neodymium components (A) = active version with 700W amplifier |
|
Components LF |
8"
(200 mm.) |
10"
(250 mm.) |
12"
(320 mm.) |
15"
(400 mm.) |
|
Components HF |
1"-driver mounted coaxially on a horn
|
1"-driver mounted on a horn
|
1,4"-driver mounted coaxially on a horn
|
1,4"-driver mounted coaxially on a horn
|
| Power handling RMS |
250 W
|
300W
|
400W
|
500W
|
| Power handling Cont. |
500W
|
600W
|
800W
|
1000W
|
| Frequency responce -6dB |
60Hz - 19kHz
|
50Hz - 19Hz
|
50Hz - 18kHz
|
45Hz - 18kHz
|
| Sensitivity (1w/1m.) |
95 dB
|
99 dB
|
100 dB
|
100 dB
|
| Max SPL (calc.) |
121 dB
|
127 dB
|
129 dB
|
130 dB
|
| Nominal Impedance |
8 ohm
|
8 ohm
|
8 ohm
|
8 ohm
|
| Dispersion |
H100 x V100
|
H90 x V60
(mounted on speaker-stand) |
H80 x V80
|
H80 x V80
|
| Measurements (mounted on top-hat) H x W x D (cm.) |
35 x 29,5 x 27,5
|
45 x 33,5 x 29,5
|
34 x 50 x 42
|
60 x 55 x 40
|
| Weight (kg.) |
10
|
11,5
|
17
|
21
|
| Connectors passive version (Bi-amplified) |
2 x Neutrik speakon 4-pin, using 1+/1- as input and 2+/2- as link/through
|
2 x Neutrik speakon 4-pin, using 1+/1- as input and 2+/2- as link/through
|
2 x Neutrik speakon 4-pin, using 1+/1- as input and 2+/2- as link/through
|
2 x Neutrik speakon 4-pin, using 1+/1- as input and 2+/2- as link/through
|
| Included flightware and hardware |
Top hat for speaker-stand
M10 thread for mounting on clamp or using the installation bracket |
Top hat for speaker-stand
M10 thread for mounting on clamp or using the installation bracket |
Flight-rails for use with flightware, Top-hat for mounting on speaker-stand,
|
Flight-rails for use with flightware, Top-hat for mounting on speaker-stand,
|
| (A) Active versions |
N/A |
MF10A
|
CXL122MPA
|
CXL152MPA
|
| Amplifier | - |
700W class-D
Powersoft |
700W class-D
Powersoft |
700W class-D
Powersoft |
| PRESETS | - |
4 PRESETS
1) Fullrange 2) Ext. Fullrange 3) Top1, 95Hz HP 4) Top 2 95Hz HP |
4 PRESETS
1) Fullrange 2) Ext. Fullrange 3) Top1, 95Hz HP 4) Top 2 95Hz HP |
4 PRESETS
1) Fullrange 2) Ext. Fullrange 3) Top1, 95Hz HP 4) Top 2 95Hz HP |
| Input signal | - |
Neutrik XLR
female input Male output |
Neutrik XLR
female input Male output |
Neutrik XLR
female input Male output |
| Input power | - |
230V
Neutrik Powercon Blue input White output Max 16A load |
230V
Neutrik Powercon Blue input White output Max 16A load |
230V
Neutrik Powercon Blue input White output Max 16A load |
| Active versions (A) Our multipurpose stagemonitors and fullrange speakers are avaliable in two versions. 1) Passive, Bi-amplified, with built in deticated two-way passive crossover, to be used with en external 19'' amplifier (we recommend P3000 or P3000DSP) 2) Active, Self-Powered versions, with the same specification as the passive version, but with the addition of 700W Class-D amplifier with 4 pre-programmed PRESETS. Three models are avaliable with built-in amplifiers - MF10A - CXL122MPA - CXL152MPA With Neutrik PowerCon in / out for power Neutrik XLR in / through Volume potentiometer for gain Four Presets are avaliable in the active versions 1) Fullrange (for use as stagemonitor and other fullrange applications) 2) Extended fullrange (Extended frequency responce, with added low frequency punch) 3) Mid/High 1 (For use with active subwoofer in an active sound system as a top speaker, mainly for recorded music) 4) Mid high 2 (For use with active subwoofer in an active sound system as a top speaker, mainly for live applications |
 |
  |
|
