 |
| When it comes to Lo frequency infra-sub reproduction in today´s digital 3D cinemas, there can be no shortcuts! You need to have high sensitivity, low distortion levels, massive power-handling, extremely good cone control and a very high MAX spl (Sound Pressure Level) The woofers must be able to withstand long hours of punishing, constant lo-frequency sound reproduction. the cabinets must be heavily re-inforced to omit self-vibrations and unwanted loss of energy. All our cinema subwoofers are designed and manufactured according to the above stated phrases for an unforgettable immersive experience. |
SUB2The SUB2 was designed to fit between standar 600x600 mm. baffel wall constructions, with a relatively shallow measurement, where depth is critical. Very controlled cone-movements in combination with high sensitivity and power handling makes the SUB2 ideal for small to medium sized theatres. Image showing a SUB2 with fully covering perfored steel grille with a speaker foam in front, both with minimum air-flow resistance, so as not to influence the soundwaves negative. the fronts can be added when installing in difficult enviromnents where the subwoofers are visible, to protect the cones, and to blend in. |
 |
| Technical specifications | |
| Construction | Front loaded, tuned bassreflex |
| Cabinet construction | 19 mm. Medium Density Fiberboard (MDF) heavily reinforced bassreflex cabinet |
| Finnish | Two-component hardened lacque, black texture |
| LF drivers | 2 x 15" Long excursion cone speakers |
| Power handling AES Cont. Peak |
2 x 700W 2 x 1400W 2 x 5600W |
| Sensitivity 1W/1m. (2Pi) | 100dB (2 x 97dB) |
| Max SPL Cont. (Calculated) | 134dB |
| Max SPL Peak (calc.) | 143dB |
| Impedance | 2 x 8 ohms (4ohms in parallel mode) |
| Weight | 55 |
| Measurements | H1000 x W520 x D450 |
| Connectors | Pole screw terminals, gold plated |
| Number of amplifier channels | 1 or 2, depending on ordered connection configuration |
 |
|
SUB18With the 520mm. width and only 350mm in depth, the SUB18 is ideal whern upgrading or re-installing a sound system in a cinema and there is no place to fit larger subwoofers. 700W AES / 1400W cont, is more than enough to reproduce earthshaking lo frequency effects. Very controlled cone-movements in combination with high sensitivity and power-handling makes the SUB18 ideal for small to medium sized theatres. |
 |
| Technical specifications | |
| Construction | Front loaded, tuned bassreflex |
| Cabinet construction | 19 mm. Medium Density Fiberboard (MDF) heavily reinforced bassreflex cabinet |
| Finnish | Two-component hardened lacque, black texture |
| LF drivers | 18" Long excursion cone speakers with 4'' Voice Coil, double spider, coated cone, |
| Power handling AES/RMS Cont. Peak |
700W 1400W 2800W |
| Sensitivity 1W/1m. (2Pi) | 99dB |
| Max SPL Cont. (Calculated) | 131dB |
| Max SPL Peak (calc.) | 137dB |
| Impedance | 8 Ohms |
| Weight | 40 kg. |
| Measurements | H700 x W520 x D350 |
| Connectors | Pole screw terminals, gold plated |
| Number of amplifier channels | 1 |
|
Download PDF |
SUB18HP18'' HIGH POWER SUBWOOFER FOR SMALL TO MEDIUM SIZED AUDITORIUMS.The SUB18HP houses one of the most powerful 18'' conespeaker woofers there is! With the extremely reinforced cabinet and high level of cone-control, in combination with very low distortion, astounding result is achieved. High power handlingHigh and sensitivity. Low distortion. Frontloaded tuned bassreflex design |
 |
| Technical specifications | |
| Construction | Front loaded, tuned bassreflex |
| Cabinet construction | 19 mm. Medium Density Fiberboard (MDF) heavily reinforced bassreflex cabinet |
| Finnish | Two-component hardened lacque, black texture |
| LF drivers | 18" Long excursion high power cone speaker |
| Power handling AES Cont. Peak |
1200W 2400W 9600W |
| Sensitivity 1W/1m. (2Pi) | 97dB |
| Max SPL Cont. (Calculated) | 134dB |
| Max SPL Peak (calc.) | 143dB |
| Impedance | 8 Ohms |
| Weight | 40 |
| Measurements | H700 x W520 x D620 |
| Connectors | Pole screw terminals, gold plated |
| Number of amplifier channels | 1 |
| |
|
SUB6
2x18'' POWERFUL SUBWOOFER FOR MEDIUM TO LARGE SIZED AUDITORIUMS.
- 2800W cont. power handling (1400W AES) - Front-loaded bassreflex construcion - 4'' voicecoils with double spider technology - Extra long excursion cones - Heavily reinforced Medium Density Fibreboard cabinet - Seperate vented chamber for best performance. - 142dB max SPL cont. program |
 |
| Technical specifications | |
| Construction | Front loaded, tuned bassreflex |
| Cabinet construction | 19 mm. Medium Density Fiberboard (MDF) heavily reinforced bassreflex cabinet |
| Finnish | Two-component hardened lacque, black texture |
| LF drivers | 2x18" Long excursion cone speakers |
| Power handling AES Cont. |
2x700W (1x1300W) 2x1400W (1x2600W) |
| Sensitivity 1W/1m. (2Pi) | 2x102dB (1x105dB) |
| Max SPL AES | 136dB |
| Max SPL Cont. installed in baffel-wall (Calculated) | 142dB |
| Impedance | 2x8 Ohm (1x4 ohm) |
| Weight | 85 |
| Measurements | W600 x D500 x H1200 |
| Connectors | Pole screw terminals, gold plated |
| Number of amplifier channels | 1 |
| |
|
SUB6HP- 4800W cont. power handling (2400W AES) - Front-loaded bassreflex construcion - 4'' voicecoils with double spider technology - Extra long excursion cones - Heavily reinforced Medium Density Fibreboard cabinet - Seperate vented chamber for best performance. - 143dB max SPL cont. program |
 |
| Technical specifications | |
| Construction | Front loaded, tuned bassreflex |
| Cabinet construction | 19 mm. Medium Density Fiberboard (MDF) heavily reinforced bassreflex cabinet |
| Finnish | Two-component hardened lacque, black texture |
| LF drivers | 2x18" Long excursion cone speakers |
| Power handling AES Cont. Peak |
2x1200W 2x2400W 2x9600W |
| Sensitivity 1W/1m. (2Pi) | 2x97dB (1x100dB) |
| Max SPL AES | 131dB |
| Max SPL Cont. (Calculated) | 134dB |
| Max SPL Peak (calc.) | ??? |
| Impedance | 8 Ohms |
| Weight | 85 |
| Measurements | ??? |
| Connectors | Pole screw terminals, gold plated |
| Number of amplifier channels | 1 |
| |
|
SUB21HPMASSIVE 21'' HIGH POWER SUBWOOFER FOR MEDIUM TO LARGE SIZED AUDITORIUMS.The SUB21HP houses one single 21'' woofer with 6'' split winding voice coil with 15 mm. Xmax, it is one of the most powerful 21'' cone speaker woofers there is! With the extremely reinforced cabinet and high level of cone-control, in combination with very low distortion, astounding result is achieved. High power handlingHigh and sensitivity. Low distortion. Frontloaded tuned bassreflex design |
|
| Technical specifications | |
| Construction | Front loaded, direct radiating, tuned bassreflex |
| Cabinet construction | 19 mm. Medium Density Fiberboard (MDF) heavily reinforced bassreflex cabinet |
| Finnish | Two-component hardened lacque, black texture |
| LF drivers | 21" Extra Long excursion, (15 mm. X-max) high power cone speaker |
| Power handling AES Cont. Peak |
2000W 4000W 8000W |
| Sensitivity 1W/1m. (2Pi) | 99dB |
| Max SPL Cont. (Calculated) | 138dB |
| Max SPL Peak (calc.) | 143dB |
| Impedance | 4 Ohms |
| Weight | 50 |
| Measurements | H800 x W600 x D650 |
| Connectors | Pole screw terminals, gold plated |
| Number of amplifier channels | 1 |
| |
|